• Enquiry
  • Login
  • Sign Up

Heating and Ventilation

Laboratory Supplies - We are a leading Importer & Supplier of Heating and Ventilation such as Control Unit for Ventilation System, Ventilation System Trainer, Ventilation Trainer, Domestic Heating Circuit Training Panel, Safety Devices Training Panel, Training Panel Function of Gas Heater and many more items from India, civil engineering laboratory equipments suppliers

Control Unit for Ventilation System Laboratory Equipments Supplies

Technical Description The control unit is required if the ventilation system is to be used for experiments with temperature control. The control unit is connected between the ventilation system and an external source of hot water using quick-action couplings. With such an arrangement it is possible to demonstrate room temperature control in ventilation systems. Only original parts were used for the control unit.....

Product Code: NLE-Export-162001 - (Control Unit for Ventilation System Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/control-unit-for-ventilation-system-laboratory-equipments-supplies

Ventilation System Trainer Laboratory Equipments Supplies

Ventilation systems are often used in building services engineering to achieve the required air change rates in the individual rooms. The ventilation air can also be heated or cooled by heat exchangers. A ventilation system is a preliminary stage for an air conditioning system in which the air can also be humidified or dehumidified. The system is assembled from standard industrial components. The plexiglas windows and exposed ductwork ensure that normally hidden components can be seen: inspection covers and fire dampers, filters, heaters / coolers, louvre damper, etc. The original function is fully retained. The system emphasises ventilation rather than air conditioning. Depending on the operating mode, heating or cooling, a supply of hot or cold water is required in the laboratory. The system requires a three-phase mains supply. With the additional module, a room temperature control system can be realised with the ventilation system.....

Product Code: NLE-Export-162002 - (Ventilation System Trainer Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/ventilation-system-trainer-laboratory-equipments-supplies

Ventilation Trainer Laboratory Equipments Supplies

The designed for training in ventilation engineering. Once the trainee has built a ventilation system independently, the effects of bends, branches, regulator flaps on the airflow rate, the air velocity, as well as the pressure loss can be investigated. For this purpose, an inclined tube manometer with 2 measuring ranges and a digital handheld unit for the measurement of the air velocity are included, along with numerous other components. The individual components in the ventilation system are fitted with pressure measuring glands. The power consumption of the fan is indicated on the switch cabinet using a voltmeter and an ammeter. The components are the same as those used in ventilation engineering.....

Product Code: NLE-Export-162003 - (Ventilation Trainer Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/ventilation-trainer-laboratory-equipments-supplies

Domestic Heating Circuit Training Panel Laboratory Equipments Supplies

Technical Description A pump circulates water through four radiators. The temperature of the radiators is set using thermostatic valves. A digital controller keeps the room temperature constant by driving the fourway mixing valve. This valve sets the temperature of the boiler return and the heating feed flow. Cold water connections enable the heat generated to be dissipated. The differential pressure across the pipe system is limited using a relief valve. Temperatures can be read on dial thermometers. Supplies of hot and cold water are required for operation. The training panel can be fitted to the Universal Stand.....

Product Code: NLE-Export-162004 - (Domestic Heating Circuit Training Panel Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/domestic-heating-circuit-training-panel-laboratory-equipments-supplies

Safety Devices Training Panel Laboratory Equipments Supplies

Technical Description An electrically heated pressure vessel is mounted on the panel. The vessel can be filled via different pipe sections. One pipe section is equipped with a system of safety devices for protecting a sealed water heater. The pressure vessel is also equipped with a thermal discharge safety device that discharges to a blow-off pipe. When the pressure or temperature level set is exceeded, the safety devices are tripped. Pressure and temperature in the system are displayed. A supply of water is required for operation. The training panel can be fitted to the Universal Stand.....

Product Code: NLE-Export-162005 - (Safety Devices Training Panel Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/safety-devices-training-panel-laboratory-equipments-supplies

Training Panel Function of Gas Heater Laboratory Equipments Supplies

Technical Description Is used to illustrate the functioning of a gas combination water heater. The main components of the gas water heater are clearly arranged on a panel to allow better understanding. A system diagram also illustrates the function. The HL 530 allows demonstration of a heating circuit and representation of domestic water heating. A plate heat exchanger is used to simulate a radiator. Cold water is fed through the heat exchanger as a heating load. A sight glass allows observation of the gas flame in the burner. Built-in thermometers and flow meters allow the recording of measured values to determine the power and efficiency. The unit is operated with liquid gas (propane, connection pressure 50mbar) and is therefore independent of any pre-installed natural gas lines. The panel is attached to the Universal Stand (available as an accessory).....

Product Code: NLE-Export-162006 - (Training Panel Function of Gas Heater Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/training-panel-function-of-gas-heater-laboratory-equipments-supplies

Demo Unit Gas Burner Laboratory Equipments Supplies

Technical Description The demonstrates the basic functioning of an original gas burner and its typical behaviour in case of faults. Standard industrial components are used. All operating states of the burner are simulated, allowing this demo unit to be operated without gas and flames. The unit is therefore totally non-hazardous and has no gas or waste gas lines. On the front panel is a graphical representation of the controller unit connection. Important electrical monitoring points (controller unit terminals) on the burner are accessible for fault analysis using laboratory sockets and bridges on the front panel. Faults can thus be checked either during operation under voltage or with no voltage as an isolated component. ....

Product Code: NLE-Export-162007 - (Demo Unit Gas Burner Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/demo-unit-gas-burner-laboratory-equipments-supplies

Forced Air Gas Burner Training Panel Laboratory Equipments Supplies

Technical Description The system contains a commercially available forced air gas burner. The elements for a gas control loop are combined into one compact fitting. The burner function is simulated using air making it possible to use the unit in training rooms without hazard. The compressed air is supplied by a small integrated compressor. A pre-programmed pocket calculator is fitted to the panel which enables the required gas flow rate to be calculated as a function of altitude, type of gas, admission pressure and heat required. ....

Product Code: NLE-Export-162008 - (Forced Air Gas Burner Training Panel Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/forced-air-gas-burner-training-panel-laboratory-equipments-supplies

Instantaneous Gas Heater Laboratory Equipments Supplies

Technical Description The housing and heat exchanger of the instantaneous heater have been removed to clearly show the internal components. For safety reasons, the trainer is operated with air. Burner flames are simulated using an array of LEDs. A diaphragm air pump with pressure regulator generates the compressed air required for operation at the correct admission pressure. All the necessary safety functions such as lighting the pilot, thermocouple flame safeguard and temperature cut-out are simulated electronically using a PLC. The PLC is programmed to simulate a total of 12 different faults. A supply of water is required.....

Product Code: NLE-Export-162009 - (Instantaneous Gas Heater Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/instantaneous-gas-heater-laboratory-equipments-supplies

Domestic Gas Supply Laboratory Equipments Supplies Training Panel

Technical Description The experiments are performed with air. A compressed air connection with reservoir and pressure reducer are included on the panel. The panel has two pipe circuits that can be individually selected. Various leaks can be simulated in one gas line. The other line represents a normal gas supply pipe. A gas meter is fitted in each line. Typical industrial components are used. Leak detection and installation work can be performed on gas pipes by the trainee. A compressed air supply is required for operation. The training panel can be fitted to the Universal Stand.....

Product Code: NLE-Export-162010 - (Domestic Gas Supply Laboratory Equipments Supplies Training Panel)

   
http://www.naugralabequipments.com/domestic-gas-supply-laboratory-equipments-supplies-training-panel

Safety & Control in Heating Systems Laboratory Equipments Supplies

Technical Description Using the test stand various safety and control devices can be investigated and evaluated. Typical industrial components are used. PC data acquisition allows the data to be displayed graphically. A supply of water and compressed air is necessary for operation.....

Product Code: NLE-Export-162011 - (Safety & Control in Heating Systems Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/safety-control-in-heating-systems-laboratory-equipments-supplies

Oil Tank Safety Trainer Laboratory Equipments Supplies

Technical Description The system contains all the stipulated safety fittings and tank protection devices. The double-walled oil tank includes filling and outlet devices. Indicators such as a level gauge and a leak detector are fitted to a metal panel. The system is fully functional so it is possible to use it for the supply of oil to laboratory equipment as well as performing the tests and demonstrations. The tank capacity is approx. 350 litres.....

Product Code: NLE-Export-162012 - (Oil Tank Safety Trainer Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/oil-tank-safety-trainer-laboratory-equipments-supplies

Exhaust Gas Analyser Laboratory Equipments Supplies

Technical Description The unit is portable and is thus suitable for field use. Power can be supplied either using a rechargeable battery, or from the mains. The unit enables, amongst other aspects, the O2, CO, CO2 and nitrogen oxides in flue gasses from boilers to be measured at the same time as the flue gas and combustion air temperature are measured. Along with the display, the unit is equipped with a thermal printer and a PC interface. Apart from a PC, it is also possible to connect, for example, the Large Display.. ....

Product Code: NLE-Export-162013 - (Exhaust Gas Analyser Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/exhaust-gas-analyser-laboratory-equipments-supplies

Domestic Water Heating System Laboratory Equipments Supplies

Technical Description The unit features viewing windows built into the sides of the boiler which enable the flame to be observed. The immediate results of different burner settings are directly visible. The unit contains a heatable domestic water tank as a second load. The system is equipped with all stipulated safety devices. All water circuit temperatures and flow rates together with the oil pressure and combustion chamber temperature are measured. An integrated hot water circuit with a plate heat exchanger simulates a central heating circuit. All measured data is transmitted to a PC and displayed. The system is supplied with an oil burner and oil tank as standard. Gas burners are available on request.....

Product Code: NLE-Export-162014 - (Domestic Water Heating System Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/domestic-water-heating-system-laboratory-equipments-supplies

Domestic Heating Furnace Laboratory Equipments Supplies

Technical Description Different operating points can be investigated by changing the oil pressure after the preset boiler water temperature has been reached. An integrated hot water circuit with plate heat exchanger simulates the heating circuit in a house. The heat generated can be dissipated via cooling water connections, enabling continuous operation. The heat transferred can be calculated. Connections for an external heating circuit are provided on the rear of the boiler. This allows to be expanded into a complete heating system using training panels.....

Product Code: NLE-Export-162015 - (Domestic Heating Furnace Laboratory Equipments Supplies)

   
http://www.naugralabequipments.com/domestic-heating-furnace-laboratory-equipments-supplies